Service Shop
Why Service Your Gear at Aquarius Scuba?
There is no better dive shop to get your dive gear serviced than at Aquarius Scuba Diving Centre. Here’s why:
- All service performed according to the factory regulator service manuals.
- Complete disassembly, cleaning, and careful inspection of all parts for damage/corrosion/wear.
- Replacement of parts as appropriate, and always replace all soft parts and seats.
- Assembly, test, and tune to factory specifications.
- Check the submersible pressure gauge for accuracy across a range of pressures.
- Inspect the high-pressure swivel, and replace o-rings.
- Inspect all hoses, clean the BCD hose QR connector.
- We do a dual inspection including a water leak test.
- We use a state of the art Air Flow Bench like no other.
- We use and give to you our Service Quality Checklist
- We use only genuine factory-supplied parts and service kits.
- We use only oxygen-compatible lubricants during all maintenance.
- 60 Day Warranty. Your complete satisfaction is our goal. If any service from us does not meet your expectations, we will readjust or service the item again at no charge within 60 days from the date of service.
- We provide you with any gear rental FREE while you wait for the odd back-ordered item.
- We return to you all replaced parts to show we’ve actually done the proper service job.
IMPORTANT!
At Aquarius Scuba, we are authorized to sell and service almost every regulator available on the market. Most authorized dealers are able to perform warranty, repair and service work on your equipment. Availability of sub-assemblies and components, repair parts, specialized tools and maintenance manuals does not imply qualification to assemble and/or service scuba equipment. Service by other than an authorized dealer voids the warranty on all products we sell. Improper service of dive equipment can lead to serious injury or death.
Aquarius Scuba recommends servicing your equipment more regularly when participating in more advanced technical and exploration type diving. We recommend that non-qualified individuals seek professional support before attempting repairs or servicing on any diving equipment.
Regulator Set (First Stage, Primary, & Alternate)
Recommended every 2 years
$45 per stage
(includes chemical ultrasonic cleaning and water test, parts extra unless covered by manufacturer’s warranty)
Regulator Ultrasonic Cleaning & Adjustment
Recommended every 1 year
$66
(includes chemical ultrasonic cleaning and water test, parts extra unless covered by manufacturer’s warranty)
Octopus Ultrasonic Cleaning & Adjustment
Recommended every 1 year
$33
(includes chemical ultrasonic cleaning and water test, parts extra unless covered by manufacturer’s warranty)
Regulator Cleaning (saltwater damage/other)
Recommended for saltwater damage
Starting at $20
(includes chemical ultrasonic cleaning and water test, parts extra unless covered by manufacturer’s warranty)
Inflator Regulator (Air2, SS1, Octo-Z, etc.)
Recommended every 1 year
$60
(includes chemical ultrasonic cleaning and water test, parts extra unless covered by manufacturer’s warranty)
BCD Service (Power Inflator, Dump Valve & Cleaning)
Recommended every 1 year
$50
(parts not included, extra charges may apply unless covered by manufacturer’s warranty)
BCD Check Up Service
Recommended every 1 year
$25
(parts not included, extra charges may apply unless covered by manufacturer’s warranty)
BCD Power Inflator Service
When necessary
$35
(parts not included, extra charges may apply unless covered by manufacturer’s warranty)
BCD Interior Cleaning
Recommended every 2 years
$25
(includes Gear Aid B.C. Life solution)
Submersible Pressure Gauge Service
Recommended every 1 year
$15
(parts not included)
Computer Battery Change
When necessary
Starting at $50
(o-rings and battery included. Extra $50 charge may apply on models requiring pressure chamber test)
Other Gear Repair & Maintenance
When necessary
$100 per hour
(for more information, call us at 416-604-4203 or visit our service shop)
Drysuit and Wetsuit Repairs
When necessary
(Addition of pockets, relief valve (“pee-valve”), shoulder straps, knee pads, etc. Change of boots, zipper (rear or front entry), wrist or neck seal in Neoprene or latex. Valve maintenance, change and / or re-positioning. Knee pad repair. Additional Repairs, etc..)
Dryglove System Installation
When necessary
$45
(Dryglove system and gloves are extra. Free with drysuit purchase.)
Mail-in Regulator Service
Same Price.
2 Week Turnaround Time.
Instructions for Sending Your Regulator to Us
- Important: We only service brands we sell, because we are unable to provide factory authorized service for the few brands that we don’t sell.
- We suggest you send your entire regulator, including octopus, for service because problems that appear to be in one stage are often caused by problems in the other stage. Please remove and retain any hose or console mounted computers, knives, clips, etc.
- If you have any specific problems or concerns with the regulator, please make note of them in a separate note attached to the regulator.
- Package your regulator for shipment.
- Ship to us via any small package shipper you choose. We will return your equipment to you via Canada Post Expedited shipping. Send the package to:
ATTN: Service Shop
Aquarius Scuba Diving Centre, Inc.
4020 Dundas Street W
Toronto, ON M6S 4W6 Canada
Why Buy A Regulator From Us?
Only the best manufacturers.
Tested and tuned by factory certified technicians.
Ready to dive.
Our full service repair facility.
Our no hassle return/exchange policy.
